Starrett Holesaw TCT for St/St Each - 75mm - 2 15/16" SM75

• Tungsten Carbide Tipped Stainless Steel (Sheet Metal - SM) Hole Saws are ideal for cutting high alloy and stainless steels, non-ferrous light metals and reinforced fabrics at much faster speeds than is possible with a bi-metal hole saw. Its tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. It is recommended for cutting sheet metal up to 3mm (1/8") thick. • Should only be used to cut flat surfaces. • Maximum material thickness of 2mm for stainless steel, mild steel and non-ferrous metals. • Recommended operating speed, 850 to 1200 RPM. • We recommended saws above 50mm diameter should only be used on pillar drills. Smaller diameters can be used with both handheld drills and pillar drills. • Safety glasses and gloves are recommended. • Do not push too hard, to avoid an impact of the TCT teeth. • Once the teeth touch the material, drill with slight steady pressure. • Split-point drill for faster penetration and self-centring helping keep the drill on target and prevent wandering. • Ideal for production cutting, and particularly suitable for use in drills with limited speed control. • Tungsten carbide tipped teeth provide superb product life and cutting performance. • Replacement pilot drills are available. • Solid one-piece construction, with complete assembly including arbor and pilot drill. • Fitted with ejector spring for easy core removal. • Step drill for faster cuts in thinner materials. • Progressive carbide tooth grind offers faster cuts with minimal snagging, better swarf removal, minimising heat build up and prolonging the saw's life. • New shallow gullet design increases tooth strength. • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13mm (1/2"). • Recommended cutting depth 3mm (1/8").